What is it?
An integrated commercial fuel dispenser: the management terminal, pump, meter, hose and nozzle are housed in one cabinet.
Integrated dispensing
FT4000APIntegrated Fuel Management Dispenser
An all-in-one fuel dispenser and management system combining controlled access, accurate metering and Fueltek FMO reporting in a stainless-steel cabinet.
Prepare an enquiry for FT4000AP
50–90 LPMAvailable dispensing rates
±0.5%Four-piston meter accuracy
4 pumpsOne internal plus three external
Fueltek product range
What it is. What it does. Where it fits.
An integrated dispenser for sites that need authorised fuel issue, metering and transaction reporting within one cabinet.
What does it do?
It authorises the user, dispenses and measures fuel, records the issue and makes the transaction available in Fueltek FMO.
Who normally uses it?
Fleets and depots installing a new dispensing point or replacing a pump with a managed all-in-one unit.
What does it control?
Its internal pump plus up to three compatible external pumps, using the chosen identification and keypad options.
Where does it fit?
It stands beside the fuel tank or dispensing island as the main pump and control point for the installation.
FT4000AP equipment
Hardware Pump, meter and terminal.
The FT4000AP combines a Fuel Access Control Terminal with an integrated pumping unit. It can manage its own internal pump and up to three external pumps, while recording authorised transactions and communicating with Fueltek FMO.
Key capabilities
What the FT4000AP provides
- Controls up to four pumps simultaneously: one internal and three external.
- Heavy-duty keypad accepts odometer readings, driver IDs, fleet numbers and job codes.
- Quarter-VGA backlit graphics display provides clear operating instructions.
- Stainless-steel, lockable cabinet designed for harsh operating environments.
- Minimum primary capacity of 2,000 transactions with expandable storage.
Pump and metering
Accurate commercial dispensing.
- Single-phase belt-driven pumping unit with air separation.
- Available at 50, 70 or 90 litres per minute; 70 LPM is standard.
- Four-piston displacement meter calibrated to forecourt accuracy.
- Meter accuracy is ±0.5%.
- Automatic cut-off nozzle and steel-braided hose, sized for the filling position.
Delivered flow depends on the tank supply and vehicle filling arrangement. Hose reach and the automatic cut-off nozzle are matched to the filling position.
Access and operation
Identification and keypad entries give the metered fuel issue its driver, vehicle and odometer context in FMO.
- Datatag, DataDisk vehicle-mounted identification, Datacard or magnetic-stripe card.
- Full alphanumeric, multi-choice alphanumeric or numeric keypad options.
- Datatag uses secure read/write authentication to identify authorised users or vehicles.
Communications hardware
Connect the managed unit to the network available at your site.
- 4G/LTE mobile data connects the managed unit to FMO without requiring fixed broadband at the fuel point.
- LAN/WAN, Bluetooth, Wi-Fi, RS232 and RS485 options are supported. Roaming SIMs and connection options.
Fueltek FMO
From metered fuel to FMO records.
The FT4000AP combines the pump, meter and access terminal at the fuel point. Authorised transactions and configured odometer, driver, vehicle and job entries become available through FMO.
- Reports can be generated, viewed and printed online, with scheduling available within the configured service.
- FMO can send a driver or vehicle message for the next relevant Datatag use.
Example FMO screens · Views and records depend on the connected equipment and account permissions. Select an image to view it full size.
Technical information
Hardware specification.
FT4000AP combines pumping, metering, identification and reporting in an integrated dispenser. The pump, hose, access and communications arrangement is matched to your installation.
Pump specification
The standard diesel specification is shown below, with installation options available for your site.
- Pumping unit
- Belt driven with air separation
- Motor
- 230 V single phase, rated at 10 A
- Meter
- Four-piston displacement meter, accurate to ±0.5%
- Pump speed
- 70 LPM standard; 50 and 90 LPM options
- Hose and nozzle
- 3.6 m steel-braided hose and automatic cut-off nozzle; longer hoses available
- Display
- Backlit electronic LCD graphics display; individual issue up to 9,999.9 litres
- Period totaliser
- Up to 9,999,999 litres
- Lifetime totaliser
- Up to 9,999,999 litres
Dimensions and construction
- Overall height
- 1,590 mm
- Cabinet width
- Approx. 500 mm
- Base footprint
- Approx. 585 mm × 585 mm
- Base fixing centres
- Approx. 520 mm × 520 mm
- Nozzle height shown
- Approx. 1,100 mm
- Cabinet
- Stainless steel with lockable front door
Technical detail
Pump safety and metering
Pump safety, measurement accuracy and the installation conditions are separate parts of the equipment specification.
Technical information
Integrated pumping, retained records and reporting
The managed FT4000AP combines one internal pump with control of up to three compatible external pumps.
Input and storage
Configured prompts can collect odometer, driver, vehicle/fleet and job details. A minimum of 2,000 transactions is stored between downloads in non-volatile memory; expansion is available to specify.
Display and totalisers
The dispensing display shows up to 9,999.9 litres. Period and lifetime totalisers each extend to 9,999,999 litres, separately from the volume of an individual issue.
Product information
Pump construction and safety
The FT4000AP is manufactured to EN 13617-1 and conforms to ATEX requirements. Its equipment marking and installation conditions determine suitability for the intended location.
Resale option
Dispensing diesel for resale
The FT4000 MID configuration provides a separate approved measuring-system arrangement for diesel resale, with its own flow range, display and hose equipment.
Product downloads
View the full FT4000AP product sheet.
Explore the combined dispenser and access terminal, including its internal pump and connections to compatible external pumps. The cabinet drawing helps with initial site planning.
- Page 1: Integrated pump control, operator inputs, access readers and transaction storage.
- Page 2: Pump and meter specification, cabinet dimensions, hose equipment and FMO communications.
We match flow, tank connections, external-pump interfaces and identification to your installation.
See all product sheets and download guidance →FT4000AP combines pumping, metering and access control in one cabinet. We configure its external-pump connections, identification and communications around your site.
Explore the range
Related products.
Compare the FT4000AP with the standalone FT4000, Twin and HSP variants, the FT4000AB and Tankwatch to decide whether the site benefits most from integrated dispensing or another system layout.
Compare product roles
One integrated pump or two simultaneous dispensing points?
FT4000AP contains one pump. FT4000AP Twin contains two independent pumping units. Compare integrated dispensing capacity separately from the number of additional pumps each system can control.
