What is it?
A twin integrated fuel management dispenser with two pumps, two meters, two motors and two dispensing sides.
Twin-pump dispensing
FT4000AP TwinIntegrated Fuel Management Dispenser
A true twin-pump system with two pumps, two meters and two motors, built for simultaneous dispensing and higher-throughput commercial sites.
Prepare an enquiry for FT4000AP Twin
2 pumpsSimultaneous integrated dispensing
8 pumpsMaximum pump-control capability
50–90 LPMPer integrated pump
Fueltek product range
What it is. What it does. Where it fits.
A dual-pump dispenser for sites that need two simultaneous fuelling points with access control and separate transaction records.
What does it do?
It allows two managed dispenses at the same time and can be configured for the same fuel or different compatible products.
Who normally uses it?
Busier depots, mixed-fuel sites and fleets that need two vehicles or operators to refuel without sharing one hose.
What does it control?
Both internal pumps and compatible external pumps, with a stated maximum control capability of up to eight pumps in total.
Where does it fit?
It becomes the central twin dispensing point, with both sides reporting through the wider Fueltek FMO installation.
FT4000AP Twin equipment
Hardware Two independent pumps.
The FT4000AP Twin combines two independent pumping units with Fueltek fuel management. It can be configured as a single-sided or double-sided unit, and each side can use different access methods or dispense different products.
What the FT4000AP Twin provides
- Two pumps, two meters and two motors can operate simultaneously.
- Can control additional external pumps, with up to eight pumps controlled in total.
- Single-sided or double-sided configurations are available.
- Different access arrangements can be specified on each side.
- Supports same-product or mixed-product configurations such as diesel, gas oil and AdBlue.
Flexible twin configuration
Each side can use its own access arrangement, while FMO holds the configured fuel records for the installation.
- Different access devices can be fitted to each side.
- Numeric keypad and Datatag can be paired with fuel-card or QWERTY-style access on the opposite side.
- Each pump can operate at the same time.
Pump and metering
Two accurate integrated pumping systems.
- The diesel configuration uses belt-driven pumping units with air separation.
- Diesel flow options are 50, 70 or 90 LPM per pump; other products need their own compatible dispensing arrangement.
- Four-piston displacement meters record each issue.
- Automatic cut-off nozzles and steel-braided hoses for both filling positions.
Communications hardware
Connect the managed unit to the network available at your site.
- 4G/LTE mobile data, LAN/WAN, Bluetooth, Wi-Fi, RS232 and RS485 connectivity options. Roaming SIMs and connection options.
- Non-volatile memory retains data during a power failure.
Fueltek FMO
Two dispensing positions. One FMO view.
The Twin records fuel issued through its configured outlets. FMO brings those transactions into the same management platform, with distinct product records for mixed-fuel installations.
- FMO supports reporting, stock control and access-device programming for the managed installation.
- Reports can run automatically each day, week or month.
Example FMO screens · Views and records depend on the connected equipment and account permissions. Select an image to view it full size.
Technical information
Hardware specification.
Two dispensing positions support simultaneous refuelling. We match their flow, tank supplies and layout to the vehicles using your site.
Twin pump specification
These details cover the diesel arrangement. An AdBlue side has its own compatible pump, meter, hose and electrical supply.
The standard diesel specification is shown below, with installation options available for your site.
- Pumping units
- Two belt-driven units with air separation
- Motors
- Two independent 230 V single-phase motors, each rated at 10 A
- Meters
- Two four-piston displacement meters, accurate to ±0.5%
- Pump speed
- 70 LPM standard; 50 and 90 LPM options
- Hoses and nozzles
- 3.6 m steel-braided hoses with automatic cut-off nozzles; longer hoses available
- Cabinet
- Stainless steel with lockable front door
Dimensions and construction
- Overall height
- 1,590 mm
- Upper cabinet depth
- 545 mm
- Base footprint
- 780 mm wide × 640 mm deep
- Base fixing centres
- Approx. 730 mm × 590 mm
- Display
- Backlit electronic LCD graphics display; individual issue up to 9,999.9 litres
- Period totaliser
- Up to 9,999,999 litres per system display
- Lifetime totaliser
- Up to 9,999,999 litres per system display
Technical detail
Pump safety and metering
Pump safety, measurement accuracy and the installation conditions are separate parts of the equipment specification.
Technical information
Independent product paths and access arrangements
Two pumps, two meters and two motors allow independent simultaneous dispensing; the tank and product paths must support the chosen combination.
| Combination | Configuration considerations |
|---|---|
| Diesel / diesel | A suitable common supply or separate feeds supports simultaneous delivery, with access configured for each outlet. |
| Diesel / gas oil | Products, compartments, filling connections, feeds and transaction labels remain distinct. |
| Diesel / AdBlue | A separate AdBlue-compatible wetted path has its own flow and meter specification; diesel-side figures do not apply. |
| AdBlue / AdBlue | Two independent AdBlue-compatible dispensing points can operate simultaneously, each with its own product path and transaction record. |
| Access on either side | Single- or double-sided formats and different reader/keypad arrangements are available. Vehicle approach, stopping position, hose reach and departure space shape the layout. |
Twin can control up to eight pumps in total with compatible external equipment. Non-volatile memory stores at least 2,000 transactions between downloads; expanded storage is available to specify.
Product information
Pump construction and safety
The FT4000AP Twin is manufactured to EN 13617-1 and conforms to ATEX requirements. Its equipment marking and installation conditions determine suitability for the intended location.
Product downloads
View the full FT4000AP Twin product sheet.
Review how the two independent dispensing points are arranged and operated. The sheet covers cabinet options and pump specifications to help you discuss vehicle access, fluid combinations and the connections needed at your site.
- Page 1: Two-pump operation, cabinet arrangements, product combinations and access options.
- Page 2: Pump and meter specification, cabinet drawings, identification and FMO reporting.
Each side’s flow, product path and tank feed are matched to the space and vehicles using both positions.
See all product sheets and download guidance →We configure the Twin’s pumps, access control and communications around your demand and the physical fuelling area.
Explore the range
Related products.
The FT4000AP Twin is intended for sites that benefit from two managed fuelling points. Compare it with the single integrated dispenser, standalone terminal, HSP, AdBlue and Tankwatch options where the operating pattern differs.
Compare product roles
Two concurrent fills or higher-flow diesel dispensing?
Twin supports simultaneous use of two integrated pumps. HSP supports higher-flow diesel dispensing. The complete fuel path and site layout determine the right arrangement.
