01
Customer requirement
The project needed storage and dispensing arrangements that fitted busy depots with limited space.
Customer project archive
Hovis
Two bakery distribution depots required fuel facilities matched to their available space and operating requirements.
Different depots. Different storage needs.
- 2
- Depot projects
- 82,000 L
- Three-compartment tank
- 40,000 L
- Diesel tank
02
Fueltek solution
We supplied an 82,000-litre, three-compartment tank for Glasgow and a 40,000-litre diesel installation with FT4000AP Twin and TankWatch for Warrington. Each layout was designed around the available depot space.
03
Project outcome
The two facilities gained managed fuel storage and dispensing. These are project capacities, rather than standard tank sizes or a statement of the customer’s current equipment.
Equipment and quantities shown relate to this customer’s installation at the time of the project.
Product information
Two depots, two installation layouts
Glasgow
The 82,000-litre tank measured 3 m wide × 3.5 m high × 13 m long. Its three compartments held 70,000 litres of diesel, 6,000 litres of gas oil and 6,000 litres of AdBlue.
Three offset fill points provided separate tanker-delivery connections. The installation included TankWatch, an electronic contents gauge, bund and overfill alarms, a mains distribution board and an internal light with an internal switch.
Warrington
The 40,000-litre diesel installation measured 3 m wide × 3.5 m high × 6.3 m long and housed an FT4000AP Twin.
Equipment included TankWatch contents gauging, bund and overfill alarms, a mains distribution board, an internal light with an internal switch and an offset 75 mm fill point for tanker deliveries.
These dimensions and equipment arrangements relate to the Hovis projects. They are not standard FS tank sizes.
Your site
Turn the requirement into a specification.
Discuss the equipment, information and support your operation needs.
