Specification
The FT4000AP is specified as a combination fuel dispenser / fuel management system. The FT4000AP can control up to 4 fuel pumps simultaneously ( 1 internal and 3 external).
The FT4000AP is capable of up to four pump simultaneous operation. The FT4000 system incorporates a robust heavy duty keypad which enables odometer readings, driver ID’s, fleet numbers, job codes etc. to be entered at the point of fuelling. The FT4000 can be specified with keypad options including Full alpha Numeric, multiple choice alpha numeric (old style text messaging) or simply numeric.
The FT4000AP system incorporates a highly visible ¼ VGA back- lit graphics display which displays clear concise messages, to complete the user interface we use our extremely reliable Datatag reader or one of the other options available including Datadisk, Datacard or Magnetic Stripe card.
The FT4000AP incorporates vehicle / driver messaging. A message can be programmed at FUELTEK FMO and can be sent to the FACT. The next time the relevant Datatag is used at the FACT a message will be displayed. The FT4000 system has the capability to provide unlimited storage capacity for look up tables, fleet lists and transaction storage, the system offers a minimum primary memory capacity of 2,000 transactions between downloads, these are stored in non-volatile memory that does not require a battery back-up, which, means even in the event of a mains power fail the system will retain all data. The primary memory can be upgraded to store a larger number of transactions if required.
Access Method
The FT4000 system offers choices of access method. Datatag, Datadisk, Datacard or Mag Stripe card. The Datatag/ Datadisk is our preferred method and is guaranteed for the life of system.
The Datatag we manufacture is a read/write tag, incorporating high security authentication using a cryptographic algorithm and a guaranteed 100,000 read/write cycles minimum. Data retention is 10 years minimum. The advantages of the Datatag are that there are no moving parts maintenance is therefore low, saving costs in the long term on the upkeep of the system. Datatags supplied are guaranteed for the life of the system. The datatag is a read/write device and can be programmed with many operating parameters. All FUELTEK access devices are programmed directly from FUELTEK FMO, you do not have to be in possession of the device to be programed, you can commit changes at FUELTEK FMO and the device will be updated the next time it is used in the FT4000 ( FACT).
Reporting
For reporting purposes data is uploaded from the FACT to FUELTEK FMO. Reports can be generated, scheduled for automatic delivery at pre-determined times, viewed and / or printed from any location with internet access.
Communications
The FT4000 / FUELTEK FMO can support a number or communication methods.
Most commonly we use GPRS modems to allow internet connectivity at the FACT. GPRS ( General Packet Radio Service) is a wireless data service and is a connectivity solution based on internet protocols. No call charges apply using GPRS as a small monthly rental fee covers an amount of data transferred.
We can network Interface allowing the FT4000 to form part of a LAN / WAN.
We can utilise Bluetooth, Wi-fi or even cable RS232 or RS485 to provide a route into your own Broadband connection if required.
FUELTEK FMO
The Main Tasks of FUELTEK FMO are:
- Communications to the FACT
- Programming Datatags/ access devices
- Maintaining tables ( DriverFuellerLockout )
- Running Reports
- Stock Control
- Backing up data periodically
FUELTEK FMO incorporates a reports generator which gives you the ability to create and customise your own reports.
Pump Specification
The FT4000AP can be specified as a 50, 70 or 90 Litre Per Minute fuel pump. A 4 metre hard wall hose and an auto cut off nozzle are supplied as standard, we can supply a longer hose if required. The unit uses a four piston displacement meter to ensure overall accuracy of fuel dispensed. The meter is calibrated to forecourt accuracy which is achievable over all dispensing speeds.
Fueltek pumps are manufactured to EN13617-1, achieve forecourt accuracy and conform to current ATEX regulations. FUELTEK CERTIFICATE NO. 16ATEX9082X
Pumping Unit : Belt Driven with Air Separation
Motor: 230v Single Phase rated at 10 amp.
Meter: 4 Piston Displacement Meter accurate to +/ – 0.25 %
Cabinet: Stainless Steel with lockable front door.
Display: Electronic LCD Graphics Display with Backlight. Shows up to 9,999.9 litres
Period Totaliser: Shows up to 9,999,999 Litres.
Lifetime Totaliser: Shows up to 9,999,999 Litres.
Pump Speed: Standard 70 Litres Per Minute. ( available in 50 & 90lpm Option)
Standard Equipment: Auto – Cut Off Nozzle. 3.6 metre Steel Braided Hose.
Construction
The FT4000AP Cabinet is manufactured entirely from stainless steel. The unit is sturdy, robust and designed to operate in harsh environments.
